Marine Caulk MS Polymer Adhesive and Sealant (Sabatack 710)
Saba Marine Adhesives and Sealants
Sabatack 710 MS Polymer Caulk
1 case = x24 290ml cartridges
Sabatack 710 Marine-Grade Caulk Adhesive and Sealant is a fast-drying elastic, single component humidity-curing MS Polymer Sealant primarily used in sealing seams, overlaps and joints and can be used in both interior and exterior environments. World renowned across the transportation industry, professional-grade adhesive and sealant has a medium viscosity for easy application with a standard caulking gun while containing a low modulus of elasticity making it ideal for use in marine environments, specialty vehicle work, equipment assembly, and construction.
Sabatack 710 marine caulk can be spray or brush applied, perfect for sealing and coating structured surfaces in addition to uses in stone chip protection and noise dampening applications.
Sabatack 710 products are available on special order. Please fill out the contact form for any inquiries or purchase requests.
Why Choose Sabatack 710 MS Polymer Caulk?
✔ UV-stable
✔ High temperature resistance
✔ Paintable wet-on-wet
✔ Hardly any shrinkage
✔ No blistering
✔ Near odourless
✔ Solvent-free
✔ Contains no isocyanates or silicones
✔ Good adhesion without primer
✔ Fast drying
✔ Certificated
Sabatak MS polymer caulk has multiple certifications, to ensure high standards. It is certified for use as an adhesive and sealant in the food sector, and Wheelmark certified for adherence to strict fire and safety requirements.
Sabatack 710 MS Polymer Caulk Technical Data:
- Chemical Base: MS-Polymer
- Solids Content: 100%
- Skin Time: 15 Minutes
- Cure Rate: 3mm/24 hours
- Hardness: (Shore A) 60
- Tensile Strength: 1.6 N/mm2
- Elongation at Break: 135%
Sabatack 710 Marine Caulk Temperature Data:
- Working Temperature: min. +5°C (41°F) to max. +35°C (95°F)
- Storage Temperature: min. +5°C (41°F) to max. +25°C (35°F)
- Temperature Resistance: min. -40°C (-40°F) to max. +100°C (212°F)
