Sabatack 720 Marine Adhesive and Sealant




Sabatack 720 Marine Adhesive and Sealant is an elastic, single component humidity-curing MS Polymer sealant and adhesive primarily used in sealing seams, overlaps and joints and can be used in both interior and exterior environments. This marine-grade sealant has a medium viscosity for easy application with a standard caulking gun whilst containing a low modulus of elasticity making it ideal for use in marine environments, specialty vehicle work, equipment assembly, and construction.
Sabatack Advantages UV-stable, high temperature resistance Paintable wet-on-wet, hardly any shrinkage No blistering, near odourless Solvent-free, contains no isocyanates or silicones Good adhesion without primer, fast drying Certificates: Wheelmark (164.106/1121/WCL MED0327), ISEGA (in connection with HACCP)
Technical Data
- Chemical Base MS-Polymer
- Solids Content 100%
- Skin Time 12 Minutes
- Open Time 14 Minutes
- Cure Rate 3mm/24 hours Hardness (Shore A) 50
- Tensile Strength 2.8 N/mm2
- Elongation at Break 140%
- Sheer Strength 1.6 N/mm2
Temperature Data
- Working Temperature min. +5°C (41°F) to max. +35°C (95°F)
- Storage Temperature min. +5°C (41°F) to max. +25°C (35°F)
- Temperature Resistance min. -40°C (-40°F) to max. +100°C (212°F)
- Short Temperature Resistance max. +180°C (356°F) for 30 minutes