Sabatack 720 Marine Adhesive and Sealant

  • $11.99
Shipping calculated at checkout.

Sabatack 720 Marine Adhesive and Sealant is an elastic, single component humidity-curing MS Polymer sealant and adhesive primarily used in sealing seams, overlaps and joints and can be used in both interior and exterior environments. This marine-grade sealant has a medium viscosity for easy application with a standard caulking gun whilst containing a low modulus of elasticity making it ideal for use in marine environments, specialty vehicle work, equipment assembly, and construction. 

Sabatack Advantages UV-stable, high temperature resistance Paintable wet-on-wet, hardly any shrinkage No blistering, near odourless Solvent-free, contains no isocyanates or silicones Good adhesion without primer, fast drying Certificates: Wheelmark (164.106/1121/WCL MED0327), ISEGA (in connection with HACCP)

Technical Data

  • Chemical Base  MS-Polymer
  • Solids Content  100%
  • Skin Time  12 Minutes
  • Open Time  14 Minutes
  • Cure Rate  3mm/24 hours Hardness (Shore A)  50
  • Tensile Strength  2.8 N/mm2
  • Elongation at Break  140%
  • Sheer Strength  1.6 N/mm2  


Temperature Data

  • Working Temperature  min. +5°C (41°F) to max. +35°C (95°F)
  • Storage Temperature  min. +5°C (41°F) to max. +25°C (35°F)
  • Temperature Resistance  min. -40°C (-40°F) to max. +100°C (212°F)
  • Short Temperature Resistance  max. +180°C (356°F) for 30 minutes