Sabatack 710 Marine Adhesive and Sealant
Sabatack 710 Marine Adhesive and Sealant is a fast-drying elastic, single component humidity-curing MS Polymer sealant and adhesive primarily used in sealing seams, overlaps and joints and can be used in both interior and exterior environments. This marine-grade sealant has a medium viscosity for easy application with a standard caulking gun whilst containing a low modulus of elasticity making it ideal for use in marine environments, specialty vehicle work, equipment assembly, and construction.
Sabatack 710 sealant can be spray or brush applied, perfect for sealing and coating structured surfaces in addition to uses in stone chip protection and noise dampening applications.
UV-stable, high temperature resistance Paintable wet-on-wet, hardly any shrinkage No blistering, near odourless Solvent-free, contains no isocyanates or silicones Good adhesion without primer, fast drying Certificates: Wheelmark (164.106/1121/WCL MED0327), ISEGA (in connection with HACCP)
- Chemical Base MS-Polymer
- Solids Content 100%
- Skin Time 15 Minutes
- Cure Rate 3mm/24 hours
- Hardness (Shore A) 60
- Tensile Strength 1.6 N/mm2
- Elongation at Break 135%
- Working Temperature min. +5°C (41°F) to max. +35°C (95°F)
- Storage Temperature min. +5°C (41°F) to max. +25°C (35°F)
- Temperature Resistance min. -40°C (-40°F) to max. +100°C (212°F)
We Also Recommend
Axil 9420GB Two-Component Methacrylate Structural Adhesive with Glass Bead Shims